70KW Purlin Roll Forming Machine
This roll forming machine can produce three kinds of C Z U Purlin
profiles, and the rollers can be interchanged each other. It can
save production time and cost with automatic control system. Width
and thickness can according to customers requirement to be
adjustable.
Main Components
| No | Items | Qty |
| 1 | Decoiler | 1 set |
| 2 | Straightening machine | 1 set |
| 3 | Roll Forming Device | 1 set |
| 4 | Punching Device | 1 set |
| 5 | Cutting Device | 1 set |
| 6 | Guarding and Control System | 1 set |
Working Process
De-coiler → Leveling → Roll Forming→ Cutting→ Unloading
Technical Requirements
| No | Items | Technical Requirements |
| 1 | Equipment Floor Area | 21×3×3(L×W×H)M |
| 2 | Feeding Direction | From Right to Left |
| 3 | Voltage | 380V,50Hz,3 Phase |
| 4 | Air Supply | Flow Rate:0.5m³/min; Pressure: 0-0.7MPa |
| 5 | Hydraulic Fluid | 46# |
| 6 | Gear Oil | 150# |
Main Technical Parameters
| No | Items | Technical Parameters |
| 1 | Material of Strip | Q235 |
| 2 | Width of Strip | ≤500mm |
| 3 | Thickness of Strip | ≤3.2mm |
| 4 | Length | 2~6M |
| 5 | Speed of Rolling | 3m~12m/min |
| 6 | Total Power | Around 70KW |
The supplier ensures the integrity of the supply scope, in order to
meet the user's installation and operation requirements as the
principle, the supply requirements involved in the technical
specifications also serve as a supplement to the scope of this
supply. If the shortcomings are found in the installation,
commissioning and operation, the supplier will supplement them. The
hydraulic oil, gear oil, saw blade, cooling water tank, cable and
material used in commissioning shall be provided by Buyer.
FAQ of C Purlin Roll Forming Machine
Q: Is this machine automatic?
A: This is a full-automatic purlin roll forming machine. When put
the material on the de-coiler, the machine controlled by PLC will
run automatically.
Q: How many profiles can this machine produce?
A: At least three profiles, C Z and U Purlin and Channel. Our roll
forming machines all adopts quick change function, you just need
change rollers to produce different profiles.
Q: What's the material of your roll forming stands and rollers?
A: About rollers we use Cr12 or Cr12Mov, according to customers
requirements. About roll forming stands, we have many types, like
wall panel type, archway type and guide pillar type.
Q: What's the driven way of your roll forming machine?
A: Gearbox driven or chain driven, according to customers
requirements.
