Fully Automatic IBR Sheet Roll Forming Machine For Roofing Sheets /
Tile Production
Description
This kind of double layer roll forming machine is designed to
produce two different kinds of metal sheets. One is IBR Sheet,
another one is Corrugated Sheet.
However, the two layers of the roll forming parts cannot work at
the same time, which means each one of the roll forming systems
(top roll forming and bottom roll forming) will stop when the other
is working.
The two-layer or two levels roll forming parts share the same motor
and the change of running between the top and bottom roll forming
part is made through a clutch equipped on this double layer roll
forming machine.
Major Technical Parameters
Suitable Material | Type | GI Coil, PPGI & PPGL Coil |
| Thickness | 0.3-0.8mm |
| Wide | 1000/1250mm |
| Yield Strength | 550Mpa max |
Power Specs | Voltage | 380V/3PH/50HZ |
| Main Motor | 7.5kw |
| Hydraulic motor | 4kw |
| Hydraulic pressure | 10-12MPa |
Machine Specs | Forming steps number | 16~20 steps |
| Shaft Material | No.45 steel. Quenched. Diameter: 70mm |
| Roller Material | No. 45 steel, coated with hard chrome |
| Main machine body | 350# H steel welded |
| Transmission | Chain and Sprocket, chain size 1.5 inch |
| Wall Plate | 20mm thickness |
| Blade material | Cr12 mould steel with quenched treatment 60-62 |
| Forming Speed | 0-12m/min for standard solution |
Major features
1). This roll forming machine can roll form metal roofing sheet.
After roll formed by this roll forming machine, the surface will be
very smooth and beautiful without any scratch on the surface.
2). Roll forming process: uncoiler, roll forming, forming step
effect, cut to length.
3). Fully Automatic Control System with PLC.
4). Easy operation: Key in the length and quantity on the control
panel.
5). 18 months warranty.
Application
This double layer roll forming machine is widely used for the
production of roofing sheets, roof tile, corrugated roofing sheets,
etc.
